Used 1969 SOUTH BEND 17 TURN-NADO | Engine Lathes

SWING ------------------------------------- 17 in
SWING OVER CROSS SLIDE -------------------- 10-1/2 in
HOLE THROUGH SPINDLE ---------------------- 2-1/2 in
SWING OVER COMPOUND SLIDE ----------------- 4 1/4 in
SPINDLE NOSE ------------------------------ 8 in D-1 CAMLOCK
WIDTH ------------------------------------- 13 in
DEPTH ------------------------------------- 12 in
LENGTH ------------------------------------ 78 in
DISTANCE BETWEEN CENTERS ------------------ 54 in
DISTANCE CENTER LINE OF SPINDLE TO FLOOR -- 44 1/2 in
LENGTH ON BED ----------------------------- 11-3/4 in
SPINDLE DIAMETER -------------------------- 2-1/2 in
TAILSTOCK QUILL TRAVEL -------------------- 8 in
TAILSTOCK QUILL TAPER --------------------- #5 MORSE TAPER
SPINDLE SPEEDS ---------------------------- 30 TO 1,580 RPM
2 SPEED MOTOR ------------------------ 900 RPM AND 1800 RPM
SIZE OF CENTERS --------------------------- MT #4
OVERALL WIDTH ----------------------------- 94 in
OVERALL LENGTH ---------------------------- 39 in
OVERALL HEIGHT ---------------------------- 53 in
APPROXIMATE WEIGHT ------------------------ 3800 LBS
CURRENTLY WIRED --------------------------- 230V, 3PH FEATURES: THREADING COURSE THREADS 1 3/8 TO 2 1/2 TPI
THREADING FINE THREADS 2 3/4 TO 160 TPI
FEEDS .0021 TO .1242 IPR