New CLAUSING 2276 | Presses, Drill

SPECIFICATIONS:

CAPACITY - HAND FEED --------------- 1-1/4 in DIA.
PRODUCTION RATED, WITH OPTIONAL
POWER FEED, 1-1/2 HP MOTOR ------- 1/8 in IN CAST IRON,
7/8 in IN STEEL
DRILL TO CENTER OF CIRCLE ---------- 20 in DIA.
SPINDLE NOSE ----------------------- NO. 3MT, 1.74 in OD
SPINDLE TRAVEL --------------------- 6-1/2 in
COLUMN ----------------------------- GROUND STEEL, 4 in DIA.,
1/2 in THICK WALL
QUILL ------------------------------ GROUND STEEL, 2-1/2 in
DIA.
QUILL RETURN SPRING, CAPACITY ------ 40 LBS.

TABLE:
WORKING SURFACE -------------------- 22 in X 19-1/2 in
TABLE SLOTS ------------------------ TWO, 15-1/2 in LONG, FOR
1/2 in T-BOLT
TABLE TRAVEL, ONE SETTING ---------- 20 in
SPINDLE TO TABLE, MAXIMUM ---------- 33-1/8 in

BASE:
WORKING SURFACE, GROUND ------------ 15-1/2 in X 13 in
BASE T-SLOTS ----------------------- TWO, 13 in LONG FOR
1/2 in T-BOLT
SPINDLE TO TABLE, MAXIMUM ---------- 43-3/8 in
MOTOR - NEMA FRAME SIZES ----------- 182 AND 184
SHIPPING WEIGHTS, APPROXIMATE, WITH
MOTORS --------------------------- 630 LBS.

EQUIPPED WITH:

- VARIABLE COUNTERSHAFT DRIVE
- NO. 3 MT SPINDLE
- ELEVATING MECHANISM
- SWITCH
- BELT GUARD
- SPINDLE GUARD
- 2-SPEED, 3 PHASE, 220 VOLT
- LOW/HIGH INFINITELY VARIABLE SPEEDS:
150 - 2000 RPM
- MAGNETIC STARTER & TWO-SPEED DRU

SPECIFICATIONS AND PRICING SUBJECT TO VERIFICATION

OPTIONAL FEATURES:

OPTIONS FOR 2-SPEED MOTOR:

NO. 2375MT MAGNETIC STARTER & REVERSING DRUM SWITCH: -- $
810.00
WITH REVERSE ON LOW SPEED. PROTECTS MOTOR
AGAINST OVERLOAD, LOW AND NO VOLTAGE.
MOTOR WILL NOT AUTOMATICALLY RESTART WHEN
POWER IS RESTORED. TRANSFORMER PROVIDES
110V AT START/STOP PUSH BUTTON SWITCH.
6 LB.

NO. 2215 GEAR DRIVEN POWER FEED ---------------------
$1,725.00
POSITIVE GEAR DRIVE FOR MAXIMUM POWER AND
EFFICIENCY --- FEED IS ALWAYS IN DIRECT
RELATION TO DRILL SPEED.

NO. 2217 AIR-HYDRAULIC FEED -------------------------
$3,400.00
FOR AUTOMATIC OR SEMI-AUTOMATIC PRODUCTION.
EASY TO SET UP. RAPID APPROACH AND RAPID
RETURN ARE CAM ACTUATED---TO SKIP FEED,
MERELY CHANGE SHAPE OF CAM. FEEDS ARE
INFINITELY VARIABLE, 1/2 in TO 60 in PER
MINUTE---HYDRAULICALLY CONTROLLED FOR
UNIFORMITY. DEPTH STOP IS MICROMETER
GRADUATED.

NO. 302 ELECTRIC FOOT CONTROL ---------------------- $
1,010.00
OPERATES DRILL FROM FOOT PEDAL

NO. 1618 FOOT CONTROL VALVE ------------------------- $
175.00
COMPLETE WITH ACCUMULATOR, HOSE, CONNECTOR.
FOR ONE AIR-HYDRAULIC FEED. 3 LBS.

DELIVERY: SUBJECT TO STOCK