New AMERECON SRS-5-130 | Rolls, Plate Bending (incld Pinch)

SPECIFICATIONS:

CAPACITY - MILD STEEL ---------------------- 5 ft X 3/16 in
OVERALL BENDING LENGTH --------------------- 61 in
DIAMETER OF ALL ROLLS ---------------------- 5.12 in
ROLLING SPEED ------------------------------ 14 FPM
MOTORS HP ---------------------------------- 3 1-1/2
DIMENSIONS, APPROXIMATE L X W X H --------- 114 in X 29 in X 44 in
WEIGHT - APPROXIMATELY --------------------- 4900 LBS.
POWER REAR ROLL ADJUSTMENT

FEATURES:

SR-S PLATE BENDING ROLLS ARE INITIAL-PINCH TYPE, EASY TO
OPERATE AND LOW COST. THE FRAMES ARE AMPLE-SIZED TO ASSURE
RIGIDITY AND STABILITY. THE UPPER AND LOWER FRONT ROLLS ARE
DRIVEN BY BRAKE-MOTOR THROUGH HEAVILY PROPORTIONED GEARS.
THE BRAKE-MOTOR PROVIDES RAPID STOPPING OF ROLLS ROTATION.
TO CLAMP THE PLATE, THE LOWER ROLL IS EASILY ADJUSTED FROM
A SINGLE POSITION - THE OPERATOR DOES NOT HAVE TO MAKE AN
ADJUSTMENT AT BOTH ENDS OF THE MACHINE. A LOCKING DEVICE
KEEPS THE UPPER FRONT ROLL IN PROPER POSITION DURING ROLLING,
AND WHEN RELEASED, ALLOWS THE ROLL TO BE SWUNG OUT FOR RE-
MOVAL OF THE FINISHED CYLINDERS. THE REAR ROLL IS POWER-
ADJUSTED, USING A SEPARATE MOTOR AND DRIVE SYSTEM BUILT INTO
THE BASE OF THE MACHINE. A CONE BENDING ATTACHMENT IS
STANDARD EQUIPMENT, AND THE REAR ROLL CAN BE TILTED TO FACI-
LITATE THE CONE ROLLING PROCEDURE. THE SHAFTS OF ALL THREE
ROLLS ARE EXTENDED BEYOND THE RIGHT-SIDE FRAME OF THE MACHINE
FOR OPTIONAL BAR/ANGLE ROLLS. A PORTABLE PUSH BUTTON CONTROL
ALLOWS THE OPERATOR TO POSITION HIMSELF FOR CONVENIENCE AND
EASE OF OPERATION. EMERGENCY-STOP BARS OR WIRES ARE MOUNTED
AT THE FRONT AND REAR OF THE MACHINE - AND AN EMERGENCY-STOP
PALM BUTTON IS ALSO PROVIDED.

SPECIFICATIONS AND PRICING SUBJECT TO VERIFICATION

DELIVERY: STOCK - SUBJECT TO PRIOR SALE