New CARELL 307-HV | Rolls, Angle Bending

SPECIFICATIONS:

SHAFT DIAMETERS ------------------- 3.94 in
ROLL DIAMETERS -------------------- 12.4 in NOMINAL
POWER ----------------------------- 15 HP
SECTION MODULULS ------------------ 2.75/4.88 CUBIC INCH
SPEED VARIABLE -------------------- 5.75 RPM 0-17 FPM
HYD. OIL CAPACITY ----------------- 35 GALLONS
WEIGHT ---------------------------- 8,200 LBS
DIMENSIONS ------------------------ 67 in X 64 in X 67 in H
VOLTAGE --------------------------- 480/3/60 OR OTHER
(SPECIFY WHEN ORDERING)
CAPACITIES:
SECTION TYPE MAXIMUM SECTION SIZE MINIMUM I.D.SUGGESTED
Flat bar on edge 4 in x 1 inch 44 inch
Flat bar on flat 6-3/8 in x 1-3/8 in 34 in
Square bar 2-3/8 in 30 in
Round bar 3 in 32 in
Angle leg-out 4 in x 1/2 in 42 in
Angle leg-in 3-1/2 in x 3/8 in 42 in
Square tube 3 in x 1/4 in 52 in
Round tube 5 in x 12 GA 58 in
Round pipe schedule 40 4 inch 45 in
T Sections leg-out-in-lateral 4 in 44 - 50 - 44 in
C Sections legs-out-in 7 in x 2-3/4 in 30 in - 36 in
I Beams bent easy way 7 in x 2-3/4 in 32 in
H Beams bent easy way 3-7/8 in x 4 in 48 in

FEATURES:

Our Model 307-HV (CPHV-100) is a 3 driving rolls, double
initial pinch universal roll bending machine with independent
hydraulic adjustment of both lateral bending rolls and
hydraulic powered rotation of all three rolls via direct
applied hydraulic motors. Lateral guides are adjustable in
all three axii. This versatile unit is ideal for rolling
standard/special sections plus tube/pipe in mild-structural-
stainless steels and a variety of other materials. The angle
bending capacity is: leg-out 4 in x 1/2 in , leg-in 3-1/2 in x 3/8 in ,
with standard equipment.

Machine is furnished with a set of universal rolls suitable
for bending standard sections including angle iron leg-in and
leg-out. These rolls bend flat bar (on flat and on edge),
square bar, tees, channel as well as round bar, angles,
square and rectangular tube sections.

STANDARD FEATURES and EQUIPMENT

?? Rugged, rigid, one piece solid steel weldment frame,
normalized and precision machined, ample sized access panels
and ventilation for internal hydraulic unit

?? Larger, high strength steel shafts, heat treated and
ground, journaled in dual self aligning spherical roller
bearings for optimum performance, loading and efficiency

?? Independent hydraulic adjustment of both lower rolls
for double prebending

?? All 3 rolls driven by direct coupled independent
hydraulic motor/planetary reducer groups for near 100%
efficiency in torque transmission to the rolls, top shaft
protected by hydraulic overload on top drive assembly with
speed compensation feature, hydraulic unit integral to the
machine and protected by maximum pressure relief valves and
return lines. Roll rotation via dual foot pedals.

?? Hydraulic power unit integral to the machine frame,
well ventilated and protected from overload by maximum
pressure relief valves and thermal pump motor switchgear with
reset control. Solenoid valve bank situated for easy access,
coils equipped with LED illumination indicating its
activation. 15 HP (11Kw) TEFC electric pump motor!

?? Multi axis, 6 way, fully adjustable lateral guides,
optionally powered in all three directions: (radial, axial
thrust and linear up/down movements) for bending angle iron
leg-in and leg-out. Positions readable on graduated scales
for precise repeat positioning. Cam follower roller can be
positioned at different locations along the cylindrical
support roller.

?? Variable Speed rotation on ??V inch Version via digitally
driven valves for precision pre-bending and maximum
efficiency during general bending or pass through of unbent
material

?? Universal bending rolls with modular components,
hardened and wear resistant. Use of components in various
configurations permits bending of most all-standard section
types including angle iron leg-in and leg-out. Main
components, telescoping, allow swift throat width changes for
maximizing production. Shaft single keyed for easy tooling
changeover

?? Forced lubrication system providing full security
under harsh working conditions All internal moving components
have individual zerk fittings

?? Machine operates in both horizontal and vertical
positions per your needs

?? Mobile control console equipped with pushbuttons for
roll positions, dual LED digital readouts to monitor bending
roll positions, dual foot pedals for left/right rotation,
power On, hydraulic unit On and E-Stop switch for maximum
operator safety . Controls in low voltage 24VAC

?? Operating and maintenance tool Kit, instruction
manual provided

* SPECIFICATIONS SUBJECT TO VERIFICATIONS *

OPTIONAL FEATURES:

??6 Additional digital readouts to monitor all guide roll
movements (3 axis) -------------------- $8,500.00
??Rolls for bending/rolling special cross sections or
extrusions Per Size
??Beam bending traction tooling X-X axis hard way bending
(Including special roll components) --- $11,500.00
??Special additional flanges for bending another beam size,
hard way ----------------------------- $3,600.00
??Compression tooling for bending C channel hard way on edge
-------------------------------------- $8,800.00
??Special rolls to use with compression tooling for each
channel size -------------------------- $650.00
??Coil Support, hydraulic, 2 LED??s, Min/max ID 24 inch/98 inch (order
w/ machine) --------------------------- $15,700.00
??Incorporate/Interface for dual movements of spiral support
on CNC versions, CN3.1V --------------- $8,000.00

OD Tube Roll Sets Price PIPE Roll Sets Price
1-1/2 inch or 2 inch OD Tube $2,900 1 inch or 1-1/4 inch Pipe $2,900
2-1/2 inch or 3 inch OD Tube $3,600 1-1/2 or 2 inch Pipe $3,600
3-1/2 inch or 4 inch OD Tube $4,000 2-1/2 inch or 3 inch Pipe $4,000
4-1/2 inch or 5 inch OD Tube $4,800 ?µ3-1/2 inch or 4 inch Pipe $4,800
Larger OD On request Intermediate Sizes On Request
Custom Sizes On request Custom Sizes On Request
Combination Sets On request ?µCombination Sets On Request

DELIVERY: SUBJECT TO STOCK