New REPUBLIC LAGUN FTV-2F | Millers, Vertical

SPECIFICATIONS:

TABLE SIZE --------------------------- 55.25 in X 10 in
T-SLOTS -------------------------------- 3 ON 2 1/2 in CENTERS
T-SLOT SIZE ---------------------------- 5/8 in
MAXIMUM WEIGHT ON TABLE ---------------- 750 LBS
TRAVELS
TABLE TRAVEL X-AXIS, MANUAL/POWER FEED - 38 1/2 in /35-37 in
CROSS TRAVEL, Y AXIS ------------------- 16 in
KNEE TRAVEL, Z AXIS -------------------- 16 in
RAM TRAVEL ----------------------------- 22 3/16 in

HEAD
MAIN MOTOR ----------------------------- 5 HP
MECHANICAL INFINTE VARIABLE SPEED WITH
(HIGH-LOW) MANUAL SETTINGS ---------- 55 TO 4250 RPM
LOW (55 TO 490RPM) HIGH (490 TO 4250RPM)
(Opt. ELECTRONIC VARIABLE SPEED 0 TO 4200)
HEAD SWIVEL ---------------------------- 90 DEGREES
HEAD TILT ------------------------------ 45 DEGREES
DISTANCE, SPINDLE TO COLUMN ------------ 5 TO 27 in
DISTANCE, SPINDLE TO TABLE ------------- 0 TO 18 in

QUILL
POWER QUILL FEEDS ---------------------- .0015,.003,.006 in /REV
SPINDLE TAPER -------------------------- R-8
(Opt. #40 NST, #30 NST, OR UNIVERSAL Q.S. 200 OR 300)
QUILL DIAMETER ------------------------- 3 3/8 in
QUILL TRAVEL --------------------------- 5 in

MACHINE CONSTRUCTIVE DIMENSIONS
COLUMN TURRET DIAMETER (GRADUATED) ----- 15 in
KNEE WIDTH ----------------------------- 11 1/2 in
KNEE TO COLUMN BEARING LENGTH ---------- 18 in
SADDLE & TABLE BEARING LENGTH ---------- 23 in
RAM & TURRET BEARING LENGTH ------------ 19 in
RAM LENGTH ----------------------------- 36 in

PHYSICAL
WEIGHT --------------------------------- 2,850 LBS
HEIGHT --------------------------------- 104 in
WIDTH ---------------------------------- 67 in
DEPTH ---------------------------------- 63 in
POWER, DUAL VOLTAGE MOTORS ------------- 230/440VOLTS

FEATURES:

- HEAD EQUIPPED WITH in HIGH VELOCITY COOLING SYSTEM in FOR
CONSTANT TEMPERATURE
- TWO SPEED RANGES 3HP CONSTANT DRIVE (OPTIONAL 4HP)
MECHANICAL INFINITE VARIABLE SPEEDS
- SPECIAL HI PERFORMANCE TRANSMISSION BELT
- THE QUILL 3 3/8 in I

EQUIPPED WITH:

- SPINDLE TAPER R-8 WITH 4 EA. CLASS SEVEN HI-PRECISION
BEARINGS
- FLOOD COOLANT SYSTEM
- HARDENED & PRECISION GROUND WAYS
- ONE SHOT LUBRICATION SYSTEM
- DRAW BAR
- OPERATORS MANUAL/PARTS LIST
- BASIC SERVICE TOOL KIT
- 3/60/220/

OPTIONAL FEATURES:

Head Options
5 HP EVS HEAD, 0-4500 RPM, 220V -------------------- $4,150
Transformer for voltage 440 or 480V ---------------- $4,150

Power Feed Options
Lagun Lighting X-Axis Longitudinal power feed - 110V $915
Lagun Lighting Y-Axis Cross power feed - 110V ----- $915
Lagun Lighting Z-Axis Vertical knee lift - 110V ---- $915
Servo #140 X-Power Feed (Longitudinal) - 110V ------ $1,235
Servo #150 X-Power Feed (Longitudinal) - 110V - XHD $1,420
Servo #140 Y-Power Feed (Cross) - 110V ------------- $1,245
Servo #150 Y-Power Feed (Cross) - 110V - XHD ------- $1,370
Servo #140 Z Power Feed (Knee Lift) - 110V -------- $1,300
Z Axis Power Feed (Type 200) ----------------------- $1,360
Extension kit (adds 3 inch lost by power feed on X) (servo
only) ---------------------------------------------- $690

Digital Read Outs* (Installed Prices)
2 axis Newall DP700 System 16 X 36 ----------------- $2,452
3 axis Newall DP700 system - w/Quill 16 X 36 X 5 --- $3,299
3 axis Newall DP700 system - w/ Knee 16 X 36 X 16 -- $3,299
2 axis Acu-Rite 200S 16 x 36 (Installed) ----------- $2,693
3 axis Acu-Rite 200S - w/ Quill 16 x 36 x 5 ------- $3,457
3 axis Acu-Rite 200S - w/ Knee 16 x 36 x 16 -------- $3,578
Quill Mounted Inch/Metric Digital Scale ------------ $600
Fagor/Acu-Rite Vue/300 Models available upon request.

Options
Power draw bar, use with standard draw bar Pneumatic $920
Lagun 6 inch angle lock swivel base vise , 8 inch opening -- $660
Kurt 6 inch D688 Anglock vise, Opens 8.8 inch -------------- $1,385
Swivel base for Kurt 6 inch vise ----------------------- $925
Halogen work light, 110V plug-in, 3ph, 60 Hz ------- $275
Clamp kit and Stud set (52 pc 5/8 inch T slots) -------- $200
Spindle Safety Guard with micro switch. (Note: When machine
is supplied with optional electric box.) ----------- $890
Set R-8 collets (11) 1/8 inch to ?? inch -------------------- $435
Collet rack for R-8 collets - 48 pcs. -------------- $130
Collet rack for R-8 collets - 16 pcs. -------------- $90
?? inch Drill chuck (Key type) w/R-8 shank -------------- $345
5/8 inch Drill chuck (Key type) w/R-8 shank ----------- $390
?? inch Drill chuck (Key type) w/ #40 taper ------------- $520
5/8 inch Drill chuck (Key type) w/ #40 taper ----------- $560
Shell end mill adapter in R-8, ?? inch ------------------ $185
Shell end mill adapter in R-8, 1 inch ------------------ $195
Shell end mill adapter in R-8, 1 ?? inch ---------------- $245
Right angle attachment - R-8 ----------------------- $1,556
1 in arbor, 18-1/4 in long with bushings and R-8 ------ P.O.R.
1 set end mill holders R8 taper - 7pc - 1/8 inch, 1/4 inch, 3/8 inch,
1/2 inch, 5/8 inch, 3/4 inch, 1 inch ------------------------------- $950
Shell end mill adapter in #40 Taper, ?? inch ----------- $310
Shell end mill adapter in #40 Taper, 1 inch ----------- $310
Shell end mill adapter in #40 Taper, 1 ?? inch --------- $340
Right angle attachment - #40 Taper ----------------- $2,650
1 in arbor, 18-1/4 in long with bushings and #40 ------ P.O.R.
1 set end mill holders-#40 Taper - 7 pc - 1/8 inch, 1/4 inch, 3/8 inch,
1/2 inch, 5/8 inch, 3/4 inch, 1 inch ------------------------------- $2,385
Spindle #40 Taper w/ Bearings ---------------------- $1,495
Collet chuck 40T w/ set of 15 collets from 1/8 inch to 1 inch$920
#40 100TG collet chuck w/ 1 set of 8 metric collets to use
with 100TG collet chuck - 8 pc - 6mm, 8mm, 10mm, 12mm,
14mm,
16mm, 18mm, 20mm. ---------------------------- $1000
1 set of 8 collets- Metric to be used with collet chuck
100TG - size 6 to 20mm. ---------------------------- $540
Arbor Support -------------------------------------- $1,190
4 inch Riser Block ------------------------------------- $1,835
8 inch Riser Block ------------------------------------- $1,950
12 inch Riser Block ------------------------------------ $2,150
Base Chip Pan (standard size) ---------------------- $800
Mist coolant system -------------------------------- $1,405
Hardened & Ground Square Ways ---------------------- STD
Rotary table - 6 inch diameter horizontal/vertical with index
plates --------------------------------------------- $4,095
Rotary table - 10 inch diameter horizontal/vertical with index
plates --------------------------------------------- $5,465
Rotary table - 12 inch diameter horizontal/vertical ---- $5,900
Adjustable Tailstock for 10 inch table ----------------- $1,770
Adjustable Tailstock for 12 inch table ----------------- $1,770
Slotting mounting kit with no support on ram ------- $2,000
Slotting attachment, 4 inch stroke, ?? HP, 5/8 inch tool capacity
---------------------------------------------------- $5,100
Slotter tool kit, with 7 tools, and 3 bit holders -- P.O.R.
Precision ball screws for X & Y - 1-1/4 inch dia. Includes yoke
for X & Y, 2 each extensions, 2 each couplings and top
mount handles for X & Y (1 set) -------------------- P.O.R.
Auto lubrication system (recommended for precision ball
screws) -------------------------------------------- $1,650
Start up and Training, Per Day ( $150/hour plus travel and
expenses) (NET) ------------------------------------ P.O.R
***IMPORTANT!!!! It is a must to use one of the following
electrical options when purchasing more than one 110V
option. Sample: Machine plus X axis power feed plus: Y axis
P.F - or Light or DRO - etc.

Special Electrics
UL approved - NFPA-79 Electrics - Push buttons command on
the head - 4 plugs for future connection of DRO - Servo
feed - Enclosure NEMA 12 with main disconnect. (NET) $1,580
Single source Power to the machine (220 or 440volts) Main
Power Disconnect - NEMA enclosure w/ transformer to operate
machine high voltage (main motor & coolant), and (4) 110v
plug-ins (for power feed, etc.) - Coolant push buttons
ON/OFF - Emergency Stop. (NET) --------------------- $3,500

Single source Power to the machine (220 or 440volts) - (NO
Main Power disconnect) - NEMA enclosure w/ transformer to
operate machine high voltage (main motor & coolant), and
(4) 110v plug-ins (for power feed, etc.) (NET) ----- $872

Standard Packaging Options
Wood skid w/ machine wrapped in plastic. (NET) ----- $225
Wood skid w/ treated wood, machine treated with anti-rust
coat over all metal surfaces and wrapped in plastic. (NET)
---------------------------------------------------- $500

Completely enclosed wood crate (treated wood), machine
treated with anti-rust coat over all metal surfaces and
wrapped in thermal sealed foil bag. (NET) ---------- $1,600

DELIVERY: SUBJECT TO STOCK OR 30 TO 90 DAYS AFTER RECEIPT OF DOWN
PAYMENT